The DV-Solo

DV-Solo Brochure CLICK HERE

DV-Solo - Everything you need and nothing you don't...

• LATEST IN MODELING TECHNOLOGY
  The DV-Solo uses our CloneWheel® Modeling Technology. With this new technology, you hear an exact clone of the classic tonewheel organ. The result is the natural sound produced by tonewheels. Unlike long loop samples or straight sampling, our CloneWheel® modeling provides the best reproduction of the sound created by a tonewheel organ. It models the essence of the tonewheel, including cross talk, tonewheel flutter, electric hum and octave tapers. Every nuance is there.
  


• 5 CLONEWHEEL ORGANS IN ONE
  Anyone who has ever played a classic tonewheel organ knows that no two play or sound just alike. Now you can select from 5 different cloned organs. That's right, 5 different CloneWheel organs to choose from. Simply turn the CloneWheel rotary control selector.
  


• SpectraSound® ROTARY SIMULATION
  Without a doubt, it’s the most realistic rotary simulation available today. Maybe you don’t own a rotary speaker or it’s not convenient to take one with you. Don’t worry! SpectraSound® is so good you’ll have to look twice to see where the rotors are. This is because of our new technology.
  


• EASY TO PLAY
  When you sit down at the DV-Solo, all you have to do is turn it on and play. Everything you need and are familiar with, on a classic tonewheel organ, is there right where it belongs. No confusing menus or LCD screens full of features that you most likely don't or won't use. It's an organ.
  


• WATERFALL KEYBOARDS
  Along with the best sound and being easy to play, the DV-Solo has two heavy-duty 61-note keyboards with the feel of an organ, not a synthesizer or cheap portable keyboard.
  
  
• FULL COMPLEMENT OF DRAWBARS
  The DV-Solo has two full sets of 9 drawbars for the keyboard and 2 pedal drawbars.
  


• KEYBOARD SPLIT & PEDALS TO KEYBOARD
  Most single keyboards have keyboard split. But the DV-Solo's Split is easy to use and find. Just press the tab marked SPLIT. Now you can use both sets of drawbars. The right side of the keyboard is for melody and the left hand side can be used to play bass lines. Maybe you have a set of optional MIDI bass pedals connected to the DV-Solo or you just want to play left hand chords. No problem! Just press the tab marked OCTAVE SHIFT and now you can play chords, left of split. Play the melody on the right of split and pedals just like an organ.
  
  If you're playing a left hand bass line and you want a little more punch, you're covered. Just push the tab marked PEDAL TO LOWER. Now you can play the sound of the 2 pedal drawbars in the first two octaves of the organ. All this without menus or programming. Just press a tab and you're ready.
  


• Gospel Drawbar Mode (Drawbar swap)
  This is a must for any Gospel organ player. When most Gospel organists play they, use the Lower Keyboard and then use the Upper Keyboard for playing a bass line. With Gospel Drawbar Mode on, you can use the right set of drawbars for playing as if you were playing the lower keyboard. Then, let's say you want to run a bass line for a Shout. Simply press the SPLIT tab and the left set of drawbars are active and you are set to go. This would be the same feel as if you were playing the upper keyboard of a classic tonewheel organ.
  
  
• HARMONIC TOUCH PERCUSSION
  Located, right where they belong, are the rocker tabs to control the 2nd and 3rd Harmonic Percussion. Soft and Normal Percussion Volume, Fast and Slow Percussion Attack. Everything you need.
  
  
• SPLIT KEYBOARD VIBRATO AND CHORUS
  You can use Vibrato/Chorus independently or together just like the classic drawbar organ. Use the familiar rotary control to select all three Vibrato and Chorus settings.
  
  
• EXTERNAL SPEAKER READY
  The DV-Solo can be connected to either a keyboard amplifier or if you need more power, connect it to an external rotary speaker via the 11 pin standard connector.
  
  
• MIDI IMPLEMENTATION
  The DV-Solo has MIDI out for the keyboards and the pedals. You can connect an external MIDI sound module, and with the touch of a button you can play with or without the organ sound.

Specifications...

• CloneWheel Modeling Technology
  
  
• Keyboards
  Upper Keyboard - 61 notes full polyphony
  Pedal Keyboard - 25 notes full polyphony
  


• Drawbars
  2 sets of nine drawbars
  16 ’- 51/3 ’- 8’ - 4’ - 22/3’ - 2’ - 13/5’ - 11/3’ - 1’
  Pedals - 2 drawbars
  16’ & 8’
  

• Drawbar Set Select
  Drawbar Set A or Set B, MIDI Local on/off
  


• Vibrato / Chorus
  Upper On/Off, Lower & Pedal On/Off
  Select, V-1, V-2, V-3, C-1, C-2, C-3


• Harmonic Percussion
  On/Off, Volume Soft or Normal, Decay Fast or Normal, Harmonic Percussion 2nd or 3rd


• Speaker System Controls
  Internal (SpectraSound select) & External (Non Simulation)
  Fast, Stop, Slow


• Effects Controls
  Front Panel - Volume, Reverb, Key Click, Transpose (+/- 6 half tones), CloneWheel Select, Bass and Treble Controls, Clone Wheel Select (5 position)
  Back Panel - Tuning, Percussion Level.


• Connectors
  AC, One 11 Pin standard rotary connector, Two XLR Connectors L/R, Two 1/4” Audio Line Out L/R, 1/4” Stereo Headphone, Rotary Tuning Control, 1/4” Digital Volume Pedal
  
  
• Weight
  Top only = 40 lbs
  
  
• Dimensions
  Top Only = L-118cm, D- 59cm, H-19cm